Strict Standards: Only variables should be passed by reference in /homepages/3/d241741636/htdocs/stl/skins/GuMax.php on line 142
  • Log in
RCA RM4100

    Strict Standards: Only variables should be passed by reference in /homepages/3/d241741636/htdocs/stl/skins/GuMax.php on line 223

RCA RM4100

From Set-Top-Linux

Jump to: navigation, search
RM4100 Front
RM4100 Front
RM4100 Rear
RM4100 Rear

Contents

Hardware

  • Low Voltage Intel® Celeron® processor (Micro-FC-BGA) 733MHz
  • Intel 830M northbridge
  • Intel 82801DB (ICH4) southbridge
  • SMSC LPC47M192 Super I/O
  • ST M50FW080 8-Mbit (1Mbx8) Firmware Hub (FWH) flash memory
  • 128MB PC133 SDRAM on board
  • Two USB 2.0 ports
  • 2 Ultra-ATA/100/66/33 IDE channels (no connectors)
  • 64MB Compact Flash via IDE controller (upgradeable)
  • Integrated 10/100 Intel 82562ET LAN On Motherboard (LOM)
  • Integrated 2D and 3D graphics with AGP 4X interface
  • Conexant CX25873-13 High Performance Video Encoder
  • Composite and S-Video outputs (can deliver either NTSC or PAL video)
  • Sigmatel STAC9767 AC’97 2.3 20-Bit audio controller
  • Integrated Conexant CX81801-94 SmartV.XX V.92, V.34, V.32 data modem
  • IR receiver for remote / keyboard
  • 3 LEDs with GPIO control


Howto's

Howto install coreboot & Linux on the RM4100

HD Howto on the RCA RM4100

Howto Hotflash The Bios

Howto get vga out working


Downloads

coreboot bios images

Intel STB Design Archive

Gallery

RM4100 photo gallery