Strict Standards: Only variables should be passed by reference in /homepages/3/d241741636/htdocs/stl/skins/GuMax.php on line 142
  • Log in
Thomson IP1000

    Strict Standards: Only variables should be passed by reference in /homepages/3/d241741636/htdocs/stl/skins/GuMax.php on line 223

Thomson IP1000

From Set-Top-Linux

Jump to: navigation, search
IP1000 Front
IP1000 Front
IP1000 Rear
IP1000 Rear

Contents

Hardware

  • Low Voltage Intel® Pentium® III Processor with 512K Cache (Micro-FCBGA) 933MHz
  • Intel 830M northbridge
  • Intel 82801DB (ICH4) southbridge
  • SMSC LPC47M192 Super I/O
  • Firmware Hub (FWH) flash memory
    • Either ST M50FW080 8-Mbit (1Mbx8)
    • Or ST M50FW040 4-Mbit (512Kb x8)
  • 64MB PC133 SDRAM on board
  • 144 pin SO_DIMM socket
  • PCI Slot
  • Two USB 2.0 ports
  • 2 Ultra-ATA/100/66/33 IDE channels (one connector)
  • 64MB Compact Flash via IDE controller (upgradeable)
  • Integrated 10/100 Intel 82562ET LAN On Motherboard (LOM)
  • Integrated 2D and 3D graphics with AGP 4X interface
  • Conexant CX25873-13 High Performance Video Encoder
  • Composite and S-Video outputs (can deliver either NTSC or PAL video)
  • Sigmatel STAC9767 AC’97 2.3 20-Bit audio controller with digital out
  • Optical SPDIF output (Dolby Digital)
  • IR receiver for remote / keyboard
  • PS/2 Keyboard & Mouse connectors
  • 3 LEDs with GPIO control


Howto's

Howto install coreboot & Linux on the IP1000

Howto get vga out working on IP1000T

Downloads

coreboot bios images

Intel STB Design Archive

Gallery

IP1000 photo gallery